PRODUCT NAME: IWB HOLSTER

PRODUCT CATALOG NO: H715-M WCS CLIP-ON WITH BODY SHIELD

** For GSA and Volume Discounts please email esales@rptactical.com **

MATERIAL

LEATHER

1. Kind - Vegetable tanned cowhide

2. Weight - 6/7oz.

3. Grade - Full top grain

4. Other - n/a

HARDWARE

1. Snap - n/a

2. Rivet - n/a

3. Buckle - n/a

4. Metal - One true form clip

5. Other - None

THREAD

1. Kind - Polyester V346

2. Size - Three Strand

3. Other - Mill dyed to match color of product

DYE

1. Kind - Oil base Aniline dye

2. Other - All parts must be dyed twice during assembly

FINISH

1. Kind - Pigmented acrylic with top coat of Nitrocellulose

2. Other - Must have semi-gloss finish

GLUE

1. Kind - n/a

2. Other - None

PROCESSES

Edges - All edges to be edged with a #3 edger

Gluing - n/a

Sewing - Approximately six stitches per inch and sewn tightly

Burnishing - All edges burnished to a smooth finish with a 3M deburring wheel using a hard burnishing wax

Sanding - All sewn edges to be sanded smooth before edging

Creasing - All unsewn edges creased with a #5 creaser

GENERAL DESIGN AND CONSTRUCTION

Clip on inside the waist band with body shield.

The holster rides high and holds the weapon close to the wearer's body.

The general construction of the holster consists of three pieces of leather. One is the body designed with a body shield to provide comfort between the gun and the user. A leather band is sewn around the top edge of the holster so as to keep the mouth of the holster open and also a piece of leather is sewn to the body to hold the true form clip. The body is then folded on center and the outer edges are glued and sewn so as to fit the gun. The holster is then wet form molded to a detailed fit.

To finish the holster a good grade of top coat is applied and then the true form clip is installed.

All steps are to be closely followed.

Item# H715-M-WCS